MB-3.5

The MB-3.5 is a slim floorstander with two 4.5” carbon-coned drivers, a sealed ribbon tweeter and two 6.5” woofers.

The MB-3.5 works as a 2.5-way speaker, where the two midrange-woofers are supported by two 6.5” aluminum coned woofers.

The two carbon midrange-woofers are run in series for increased power handling.

The MB-3.5 cabinet is heavy, braced and curved, with carbon reinforcements. The speaker is crossed over at 3.5 kHz and the two added side woofers assist up to 200 Hz.

The MB-series features high quality crossover with top quality components. The filter has been carefully tailored to linearize the frequency region where cone and cabinet geometry play a role and also to carefully tune the speaker to a natural sounding frequency response.

Category:
Description

The MB-3.5 is a slim floorstander with two 4.5” carbon-coned drivers, a sealed ribbon tweeter and two 6.5” woofers.

The MB-3.5 works as a 2.5-way speaker, where the two midrange-woofers are supported by two 6.5” aluminum coned woofers.

The two carbon midrange-woofers are run in series for increased power handling.

The MB-3.5 cabinet is heavy, braced and curved, with carbon reinforcements. The speaker is crossed over at 3.5 kHz and the two added side woofers assist up to 200 Hz.

The MB-series features high quality crossover with top quality components. The filter has been carefully tailored to linearize the frequency region where cone and cabinet geometry play a role and also to carefully tune the speaker to a natural sounding frequency response.

Technical information

Size: (WxHxD) 178 x 1138 x 286 mm
Weight: 20,8 kg
Freq. response: 30 Hz – 40 kHz
Impedance: > 6 ohm
Crossover: 3.5 kHz 2. order acoustic slope 250 Hz 1.order slope
Enclosure: Curved, heavily braced, ventilated box design with front loaded port and adjustable aluminum feet
Drive units: 1 sealed ribbon tweeter with kapton/aluminum sandwich membrane
2 carbon coned 4,5” bass/mid driver with overhung magnet system
2 Aluminum coned 6,5” bass drivers
Finish: Black-silk or White-silk
Amplification: We recommend high quality amplifiers >50W